Fully automatic angle labeling machine is made of high -quality stainless steel, which is sturdy and corrosion -resistant, and the components are partially coordinated. It is widely used on the corner (corner) of various types of carton boxes, and the types include the types of kits, pills, milk tea boxes, electronic accessories packaging boxes, etc.
Although the whole machine is controlled by a stable servo (PLC) system, 150-320 boxes can be labeled per minute, and the accuracy of the labeling is ± 1mm. However, the equipment maintenance will not occur at the time of various faults, resulting in packaging and processing that the equipment cannot be performed normally.
Failure problems such as leakage, no bidding, and repeated bidding should be checked from these aspects;
1. Check whether the header head is bent,
2. Check whether the running parameters are different,
3. Check whether there is a problem with the position of the electric eye,
After the three steps above, check the three steps. After checking the header head and running parameters, the position is determined as a detection of electrical eye problems. The reason is that the sensitivity is insufficient. There are failures such as leakage, no bid, and repeated bidding. The solution is as follows;
In the case of drying, wipe the surface dust and shattering impurities on the surface of the electric eye, check whether the electric eye is loose, re -press the joints, and start the equipment to run normally after the above work.