After any equipment has been used for a certain period of time, there will be some large and small faults, and the flat bottle labeling machine is no exception as a mechanical equipment. Just like a car, once a car has been used for a long time, some parts will be more or less aging, and then some glitches will appear.
The same is true for our labeling machine, but when there is a problem with our labeling machine, we only need to solve the problem in time to make the labeling machine return to normal. Now let's take a look at what we should do if we don't have a label when we use the flat bottle labeling machine? How do we solve this problem? Regarding this problem, I have compiled some solutions. When our flat bottle labeling machine has a problem of not marking, we should first check whether the marking sensor is normal. If the marking sensor cannot sense that the labeled product passes through the conveyor belt, the automatic labeling machine will of course not produce the label. Of course, if the labeling sensor cannot sense that the labeling product continues to be labeled after passing the conveyor belt, then we need to wonder whether the labeling sensor of the flat bottle labeling machine has failed. If there is a problem with the target sensor, reset the parameter value or if the target sensor is damaged, you need to replace it with a new sensor.
In addition to the sensor problem explained above, there are various reasons why the flat bottle labeling machine does not produce a label. For example, if the transmission timing belt is broken, it will also cause the problem of not being able to bid. A breakage phenomenon needs to be replaced with a new conveyor belt. We also need to check whether the stripping scraper is not sharp enough and whether there is corrosion, because once these phenomena occur, our labeling machine cannot peel off the label. We also need to check. Check whether the traction mechanism is turned on. Only when the traction mechanism is turned on can the labeling be done normally. And it is also necessary to check whether the traction mechanism is loose, and if it is loose, the traction mechanism needs to be tightened. There are many problems that cause the flat bottle labeling machine to fail to bid. We can only solve this problem by finding the corresponding reason. I once encountered a situation where the labeling machine did not produce a label. The technicians of the packager checked the labeling machine and found no problem. In the end, it was found that there was no label paper. This is a typical misdirection.
The above is the "how to solve the problem of the flat bottle labeling machine not showing the label" answered for you today, I hope it can help you. Guangzhou Chaoyue is a professional labeling machine company. If you need to buy a labeling machine, please contact Guangzhou Chaoyue.