The structure of the automatic labeling machine mainly includes the following components: unwinding wheel. It is a passive wheel, used to place the roll label. It is usually equipped with a friction brake device with adjustable friction force, Labeling machine the purpose is to control the speed and tension of the reel, and maintain a smooth paper feeding.
Buffer wheel. The work is connected with the spring. Can swing back and forth. The purpose is to absorb the tension of the roll material when the device is started, keep the material in contact with the rollers, Labeling machine and prevent the material from breaking.
Guide roller. It is composed of upper and lower two, Labeling machine which play the role of guiding and positioning the roll material. Drive roller. It consists of a set of active friction wheels. Usually one is a rubber roller and the other is a metal roller, and the bottom paper passes between them. The function is to drive the roll material to achieve normal labeling. Rewinding wheel. It is a driving wheel with friction transmission device, Labeling machine which is used to rewind the bottom paper after labeling. The rotation of the delivery wheel does not interfere with the paper handling of the drive wheel, Labeling machine and the synchronous transmission is adjusted by the friction device.
Peel board. There is an angle from the end of the board (usually less than 30°), Labeling machine the purpose is to make the label easy to mark out and separate from the backing paper when the backing paper changes direction through the peeling board, Labeling machine so as to achieve contact with the labeled object. Labeling roller. Apply the label from the bottom paper evenly and flatly on the article to be affixed. This is the integral part of the labeling machine. The wheels, Labeling machine plates, and rollers constitute a fully automatic labeling machine, Labeling machine which can help you with labeling without a bit of manpower. It is a good thing that saves time and effort!