1. Appearance. The appearance of the equipment can reflect the designer's idea of the machine. Of course, the appearance we refer to here does not refer to the appearance in general. The appearance refers to the rationality of the equipment design, such as the difficulty of changing the label, whether it is necessary to use tools to adjust the position, and whether the human-machine interface is easy. Know how to operate and so on. Whether a machine is only designed to complete the packaging task, or consider the human side, just look at the appearance.
2. Sound. The characteristics of the self-adhesive labeling machine determine that the labeling motor needs to start and stop continuously. If you listen to the sound of a company’s labeling motor starting and stopping, which is more urgent, then I tell you, this machine is not a program. If it is not tight enough, there is a problem with the selection of the motor.
3. The bidding is stable. The method I often recommend to my customers is to adjust the equipment to the set maximum speed, measure the position of the brake electric eye on the label, and then quickly and continuously trigger the labeling electric eye, remember to observe whether the label is running linearly, and observe after stopping the trigger The brake electric eye is at the position of the label (the position of a good labeling machine should be the same), count the number of labels, and the number of labels produced by a good labeling machine will never be greater than the number of times you trigger, of course, if you are in Labeling is triggered again before the label is finished, and there may be fewer labels.