If there is leakage problem in automatic liquid filling machine, it will seriously affect the filling effect of the machine, if not properly handled, it may also cause more serious system failure problem inside the machine. Therefore, when there is a leakage problem in the machine, we must find out the root cause of the fault and solve these faults in time. And next, Xiaobian to summarize how to effectively deal with the problem of machine leakage.
1.Check that the feeder mechanism is clean . If it is not clean, it will cause unclean blockage in the middle of the inner and outer tubes, so it is necessary to remove the discharge device, do a good job of cleaning, and do a good job of disinfection, sterilization and maintenance.
2. Check whether the O-ring is rotten or damaged. If the O - ring rot or damage, will also cause liquid filling machine leakage. Therefore, in that case, Xiaobian suggests replacing the O-ring.
3. Check whether the feed nozzle is complete. If the filling feed nozzle is damaged, the liquid filling machine will leak during operation. Replace the damaged feed nozzle, check whether other feed nozzle is suitable, cracked or rotten, timely treatment and replacement.
4. Check the location of the barrel. Verify that the hydraulic cylinder is in the load-bearing position in the middle of the hydraulic cylinder, and check whether the piston and piston rod of the hydraulic cylinder are stable. If they are loose, please tighten them. If the fault position of the cylinder system changes, the cylinder needs to be unloaded and reinstalled and verified properly.
Although the leakage problem of liquid filling machine is not serious, it is still necessary to find out the root of the fault in time and dispose of it, otherwise it will affect the production efficiency and product quality of the user for a long time, which will bring great influence. So when we encounter the problem of machine leakage, we can refer to the above method to do a good job