The maintenance of filling machine equipment involves some professional issues, but this work does not completely rely on professional basic personnel to complete the work. The operators of the production enterprise can also meet expectations after mastering some basic essentials and following the standard operating standards. maintenance effect. Today we will summarize the essentials of the maintenance work of the filling machine:
First of all, what everyone needs to pay attention to in the maintenance process is to carry out detailed inspections. Regarding the functional use of the equipment, the connection of various parts of the equipment, and the changes in the production of the equipment, these should be carefully checked.
After the detailed inspection, if we want to understand more intuitively what aspects of the equipment need to be maintained, then direct trial operation is a good method, which is what we often call trial operation, direct By idling the equipment, we can have a good understanding of the situation of the equipment, and also let us know which aspects of the equipment need to be maintained, so that everyone has a direct grasp of the situation of the equipment.
Before driving, you must use the crank handle to turn the machine to see if there is any abnormality in its rotation. When adjusting the machine, the tools should be used properly, and it is strictly forbidden to use too large tools or excessive force to remove parts to avoid damage to the parts or affect the performance of the machine. Whenever the machine is adjusted, be sure to tighten the loosened screws, and use the crank handle to turn the machine to see if its action meets the requirements before driving.
The machine must be kept clean, and it is strictly forbidden to have oil stains, liquid medicine or glass debris on the machine, so as to avoid damage to the machine, so it must be done: during the production process of the machine, the liquid medicine or glass debris should be removed in time; the surface of the machine should be cleaned before handover. Clean each part once, and add clean lubricating oil to each activity department; it should be scrubbed once a week, especially the places that are not easy to be cleaned in ordinary use or blow it with compressed air.