Basic process of labeling

1 Fetching the label The fetching mechanism takes the label out of the label box.

Important guarantee bid quantity satisfactory request.

2 Label Transfer The label is transferred to the labeled component.

Usually in the process of marking, the realization of printing code, glue and other work.

3 Printing code The production date and batch number are printed on the label.

4 Glue Apply adhesive to the back of the label.

This work is mainly realized by gluing mechanism.

5 Labeling Attach the label to the container.

Labeling machine When the sensor sends a signal that the label is ready to label, the driving wheel of the labeling machine rotates.

Since the web label is in a tensioned state on the device, when the base paper runs close to the stripping board and changes the direction, the front end of the label is forced out and ready for labeling due to the rigidity of its own material.

At this time, the labeling object is located just below the label, and synchronous labeling can be achieved under the action of the labeling wheel.

After labeling, the sensor below the drum label sends a signal to stop running, the driving wheel is stationary, and a labeling cycle ends.

6 Roll and smooth the label glued to the container name by rolling and smoothing, so that it is further glued, eliminate wrinkles, warping, rolling and other shortcomings, so that the label is flat, lubricated and strong