The semi-automatic labeling machine is a new type of equipment. It has many advantages during operation, and its accuracy is higher than that of traditional machines. However, any equipment will have some things to pay attention to. The following The editor will tell you what should be paid attention to when using the semi-automatic labeling machine?
Some people may not be familiar with the semi-automatic labeling machine. In fact, its application is very extensive now, and it is used in many industries. The type of this equipment is also relatively low. You still have to clarify your needs before choosing. But what you need to know is that there will be various problems when the machine is in operation. When you find the problem, be careful not to disassemble it by yourself, because the disassembly of each part of the motor may lead to the entry of foreign objects or adversely affect the assembly accuracy of each part. . These are some common problems when using semi-automatic labeling machines. After I talk about it here today, you will know. Moreover, it protects the screw rod from radial force, and it is strictly forbidden to directly lift and pull it by hand no matter whether you are taking it or installing it. In the future, if you encounter this kind of problem when operating the semi-automatic labeling machine, you must know how to deal with it. The screw rod of the machine has been coated with special grease when it leaves the factory. You don’t need to add lubricating grease when you use it, and you should pay attention to protecting the grease from being wiped off during installation.
When using the semi-automatic labeling machine, in addition to paying more attention to the above, you also need to know that its screw motor is a precision component. This is also a very important place. Some users did not understand it before. A lot of problems appeared after not using it for a long time. The reason why this is done for you is to ensure the life of the nut inside. Care should be taken on the surface = anti-particle dust. The manufacturer strictly stated that it is forbidden to drop the motor and the collision of the motor during the process of taking the motor. If you don’t understand it, it’s true You can read it carefully here. This will prolong its lifespan. And you should pay attention to the protection of the lead-out wires. Do not pull the lead-out wires hard, and the ambient temperature of the semi-automatic labeling machine is generally kept at -22°C-55°C when it is running. This is also a very important place. And it avoids the phenomenon of motor out-of-step or jacking as far as possible when it is working. In order to prolong the life, the load should be lower than 50% of the motor thrust at the running speed, so what we are talking about here is what the staff must understand .
For some matters that should be paid attention to when the semi-automatic labeling machine is running, I will stop here today. I hope everyone can understand it well, because some places are easy to damage the machine if you don’t pay attention to it, so in order to use it for a long time , usually still need to take good care of it. Hope today's content can help more people.