Bottom paper slack at the stripping plate: The slack of the bottom paper is related to the slippage of the traction mechanism if the traction speed is too low. If the traction speed is too low, Labeling machine increase the traction speed to solve it; Labeling machine if the traction mechanism is slipping, tighten the traction roller lock The screw to the bottom paper does not slip. In addition, Labeling machine pay attention to whether the drive belt behind the receiving shaft is broken.
Missing stickers: The objects are too close to each other. During the labeling process, Labeling machine the measuring sensor receives signals at the same time, Labeling machine which can be solved by reducing the speed or decelerating.
The labeling position is unstable: the belt pressing device may not be pressed tightly, Labeling machine causing the label belt to loosen and the electric eye to detect inaccurately. It is possible that the traction mechanism is slipping or not pressed tightly, causing the bottom paper to not be taken away smoothly. The labeling quality is not good, Labeling machine there are bubbles or wrinkles. It is possible that the labeling tape is not parallel to the surface to be pasted.
Put the labeling object into the labeling belt area and observe the distance between the labeling belt and the surface to be pasted. The delivery speed and the delivery speed and the overwriting speed are not matched, Labeling machine and the delivery speed is mostly too fast. Readjust the delivery speed or delivery speed. The label is not sticky and easily falls off.