The automatic horizontal round bottle labeling machine is suitable for the circumferential and semicircular labeling of cylindrical objects that are unstable, Labeling machine such as oral liquid bottles, penholders, lipsticks, Labeling machine etc. Adopt horizontal transmission and horizontal labeling methods to increase stability and improve labeling efficiency.
Everyone will explain how to deal with common failures encountered by this equipment.
Bottom paper breakage: Bottom paper breakage is closely related to the three factors of label bottom paper quality, label traction path scratching the bottom paper, Labeling machine and label adhesion. Check whether the backing paper is cut. If the backing paper is cut, you need to replace the high-quality backing paper. It is recommended to use Glassine bottom paper, Labeling machine and the label supplier is required to control the depth of die cutting so that the bottom paper cannot be damaged. Check whether there are scratches in the label detour, Labeling machine and eliminate the scratch factors.
If the label sticks, Labeling machine the label is easy to tear. Control the length of the next label to ensure that it does not stick to the labeled product. The labeling deviation exceeds the accuracy requirements: the label deviation and the label tape are misaligned, the label tape direction is not parallel to the product conveying direction, the traction wheel is slippery, the product positioning detection is inaccurate, the label is not applied to the product along the labeling roller, Labeling machine the product error is few These factors are related, check the above factors, Labeling machineand then solve them in a targeted manner.
If the label tape goes off-track, loosen the traction mechanism, Labeling machine and pull the label back and forth to let it go straight automatically. After the label is aligned, clamp the limit rings on both sides to correct the label. The direction of the label tape is not parallel to the direction of the product conveying, Labeling machine and parallelism can be achieved by adjusting the inclination of the labeling head. The traction sheave slips, Labeling machine the traction sheave is worn, and the traction sheave locking screw is loosened. For two reasons, Labeling machine the traction sheave locking screw can be tightened. Product error. In the process of product manufacturing, edge error will cause labeling deviation, Labeling machine which can be solved only by controlling the product quality.