Labeling machines mainly include: self-adhesive labeling machine, sleeve labeling machine, round bottle labeling machine, beer labeling machine, semi-automatic labeling machine, labeling machine, automatic labeling machine, automatic labeling machine, labeling machine , Automatic labeling machine, hot melt adhesive labeling machine. These products can be pasted on flat surfaces, single-sided or multiple-sided pasting of packaging, cylindrical pasting, Labeling machine partial or full-covering cylinder pasting, recessed and corner parts pasting, etc. If the labeling machine has a longer life, Labeling machine then we Take good care of the labeling machine and pay attention to the maintenance of the labeling machine.
The maintenance tips of the labeling machine: adjust the pressure brush device, Labeling machine the center of the label brush is aligned with the label and the two sides are symmetrical. The marking brush is perpendicular to the surface of the container. The overlapping gap of the pressure brush sweeping the container is: a single pressure brush is 10mm-15mm, Labeling machine and a combined pressure brush is 5mm-10mm. The distance between the cleaning brush and the sponge is 1mm~2mm.
Adjustment of the pressure bottle head. The pressing head should be 20mm lower when there is no bottle than when there is a bottle.
Adjust the label box, the center line of the label box, Labeling machine the center axis of the label station is tangent to the label paper, and the center axis of the label plate forms a line at three points. Adjust the label box to be tangent to the label paper (0 distance), Labeling machine and then move the label box closer to 1mm~ 2mm is fine. The gap between the label paper in the label box and the pressing strips on both sides should be between 0.8mm and 1mm. If the gap is too large, Labeling machine the label paper will be displaced in the label box and oblique marks will appear.
If the gap is too small, Labeling machine it will cause poor label push. Adjustment of the position of the label-grabbing hook of the label box: the upper and lower, Labeling machine left and right label-grabbing hooks are on the same vertical plane and evenly work hard on the label paper, Labeling machine so the label can be grasped smoothly. The adjustment of the label supply roller: when there is no label, Labeling machine the label pressing plate can be pressed to the front end of the label box and the label near the label hook cannot be crushed.