In fact, for a modern filling machine, Capping machine its maintenance is directly related to whether the equipment can perform normal production. The daily maintenance and maintenance of the equipment is equivalent to supplementing energy for the filling machine. If there is a certain plan to maintain the filling machine, Capping machine it is equivalent to regularly replenishing energy for the filling machine, Capping machine just like our three meals a day, which can ensure the long-term normal operation of the machine. For enterprise production, Capping machine it is the foundation to ensure the basic production capacity of the filling machine, and it is also a magic weapon to effectively ensure the growth and progress of the enterprise.
Before the maintenance of modern filling machines, Capping machine certain preparations and raw materials should be made. Among them, for the maintenance and maintenance of the filling machine, Capping machine the materials and tools that usually need to be prepared include lubricating oil, wrenches, screwdrivers, Capping machine and filling machine instructions. The maintenance steps are divided into the following points: observe the filling before going to work every day The moisture filter and oil mist device of the pneumatic combination of the machine should be removed in time if there is too much water, Capping machine and the oil level should be refueled in time; during production, frequent inspections should be made to observe the mechanical parts of the filling machine to see the rotation and lifting Whether it is normal, Capping machine whether it is abnormal, Capping machine whether the screw is loose;
Check the ground wire of the filling machine frequently, and the contact is required to be reliable; Capping machine clean the weighing platform frequently;Capping machine check whether the pneumatic pipeline leaks or whether the air pipe is broken. Replace the lubricating oil (grease) of the reducer motor of the filling machine every year, Capping machine check the tightness of the chain, and adjust the tension in time. If you stop using the filling machine for a long time, Capping machine empty the material in the pipeline. Do a good job of cleaning and sanitation of the filling machine, Capping machine keep the surface of the machine clean, frequently remove the accumulated material on the scale body, Capping machine and pay attention to keeping the electric control cabinet clean. The sensor of the filling machine is a high-precision, high-tightness, Capping machine and high-sensitivity device. It is strictly forbidden to hit and overload, Capping machine and must not be touched during the working process. It is not allowed to be disassembled for non-maintenance.