Machine cleaning: The machine can be cleaned according to specific requirements and actual needs by choosing the following two methods: water or cleaning liquid circulating filling cleaning; that is, Filling machine after the filling operation is completed, the residual materials in the hopper and the tank are cleaned.
Add water, warm water (adding washing powder, disinfectant, etc.)Filling machine soapy water, or alcohol, cleaning liquid, Filling machine etc. into the hopper; step on the foot switch to start the filling machine to make it absorb the cleaning liquid in the hopper, Filling machine and The discharging speed is adjusted fast, Filling machine the residual materials are dissolved in the cleaning liquid and the cleaning liquid can quickly wash away the residual materials in contact with the machine parts, Filling machine so that the residual materials in the hopper, Filling machine cylinder and related parts are filled out of the host along with the cleaning liquid . After many cycles of filling, Filling machine add clean water to the hopper and cycle filling. After 2 or 3 times of cleaning, Filling machine the cleaning ends.
This method is suitable for use when the cleaning requirements are not high, Filling machine the material is soluble in water, Filling machine and the liquid for cleaning the machine is non-corrosive. Note: Do not use organic solvents, strong corrosive cleaning agents (such as gasoline, solvents, xylene, banana water, etc.) to clean the machine.